|
Colt
M1911A1 Pistol (page 6)
|
|
WARNING:
Marstar assumes no responsibility for the
accuracy of the enclosed diagrams for purposes of stripping or,
assembly of parts of any firearm. Stripping,
assembly, and reassembly of any firearm or component(s)
thereof should be performed by a competent gunsmith. Marstar
assumes no liability for any modifications, repairs or
alterations performed on any firearm as a result of consulting
theses pages. For reference purposes only.
|
|
|
|
Instructions below refer to part
numbers listed on the M1911A1
Exploded Parts Diagrams. Please note the reference numbers
therein do not correspond with the part numbers in our online
catalogue.
|
|
STOP!
Always 'clear' and inspect gun to ensure ammunition is not
loaded or chambered before performing maintenance on this or
any firearm.
|
|
|
|
|
|
|
|
|
16.
|
|
Remove sear spring.
|
|
|
|
|
|
17.
|
|
Lift out sear and disconnector. Note
relationship of these parts to facilitate reassembly.
|
|
|
|
|
|
18.
|
|
Depress magazine catch from left
side; at same time rotate magazine catch lock 1/4 turn
counter-clockwise using lip of sear spring as screwdriver.
Magazine catch assembly is then removed from right side of
receiver. Catch assembly can be reduced to components by turning
lock clockwise 1/4 turn. Spring and lock will come out.
|
| Need
some parts for your pistol? Looking for a quality new or
used handgun? If so, you've come to the right site. Visit
our main pistols page to get
started! |
|
|
|
|
| Page and
Contents © Marstar Canada Inc.
|
