|
Sauer
Model 1930 Pistol (steps 1-3)
|
|
WARNING:
Marstar assumes no responsibility for the
accuracy of the enclosed diagrams for purposes of stripping or,
assembly of parts of any firearm. Stripping,
assembly, and reassembly of any firearm or component(s)
thereof should be performed by a competent gunsmith. Marstar
assumes no liability for any modifications, repairs or
alterations performed on any firearm as a result of consulting
theses pages. For reference purposes only.
|
|
|
|
Instructions below refer to part
numbers listed on the Steyr
Model 1912 pistol exploded parts diagram. Please note the reference numbers
therein do not correspond with the part numbers in our online
catalogue.
|
|
STOP!
Always 'clear' and inspect gun to ensure ammunition is not
loaded or chambered before performing maintenance on this or
any firearm.
|
|
|
|
|
0.
|
|
Note: slide
cap and trigger details of Model 1930 (1) and Behorden Model
pistols. Trigger safety of Behorden Model pistol extends from
face of trigger. Cartridge signal pin protrudes from upper
hole in slide cap of Behorden Model pistol when cartridge is
in chamber.
|
|
|
|
|
|
1.
|
|
To disassemble Model 1930 pistol,
first remove magazine and be certain chamber is unloaded. Pull
back slide (1) about an inch until safety catch (29) engages
slide. Depress rear sight and unscrew slide cap (4) from
slide. Remove breech-block assembly (7). Then release safety
and ease slide off front of frame.
|
|
|
|
|
|
2.
|
|
Safety catch should be removed
before disassembling gun internally. First remove grips,
then rotate safety catch 180 degrees until hinge pin portion is
clear of undercut in frame. Do not let safety catch detent pin
(27) and detent spring (28) fly out when safety catch is
withdrawn. To replace, depress the safety catch detent pin with
thin piece of brass and push into frame.
|
|
|
|
|
| Need
some parts for your pistol? Looking for a quality new or
used handgun? If so, you've come to the right site. Visit
our main pistols page to get
started! |
|
|
|
|
| Page and
Contents © Marstar Canada Inc.
|
